$ docker pull registry.access.redhat.com/openshift3/mongodb-24-rhel7 $ docker pull registry.access.redhat.com/rhscl/mongodb-26-rhel7 $ docker pull registry.access.redhat.com/rhscl/mongodb-32-rhel7
OpenShift Container Platform provides a container image for running MongoDB. This image can provide database services based on username, password, and database name settings provided via configuration.
These images come in two flavors, depending on your needs:
RHEL 7
CentOS 7
RHEL 7 Based Images
The RHEL 7 images are available through the Red Hat Registry:
$ docker pull registry.access.redhat.com/openshift3/mongodb-24-rhel7 $ docker pull registry.access.redhat.com/rhscl/mongodb-26-rhel7 $ docker pull registry.access.redhat.com/rhscl/mongodb-32-rhel7
CentOS 7 Based Images
These images are available on Docker Hub:
$ docker pull openshift/mongodb-24-centos7 $ docker pull centos/mongodb-26-centos7 $ docker pull centos/mongodb-32-centos7
To use these images, you can either access them directly from these registries or push them into your OpenShift Container Platform Docker registry. Additionally, you can create an ImageStream that points to the image, either in your Docker registry or at the external location. Your OpenShift Container Platform resources can then reference the ImageStream. You can find example ImageStream definitions for all the provided OpenShift Container Platform images.
You can configure MongoDB with an ephemeral volume or a persistent volume. The first time you use the volume, the database is created along with the database administrator user. Afterwards, the MongoDB daemon starts up. If you are re-attaching the volume to another container, then the database, database user, and the administrator user are not created, and the MongoDB daemon starts.
The following command creates a new database pod with MongoDB running in a container with an ephemeral volume:
$ oc new-app \
-e MONGODB_USER=<username> \
-e MONGODB_PASSWORD=<password> \
-e MONGODB_DATABASE=<database_name> \
-e MONGODB_ADMIN_PASSWORD=<admin_password> \
registry.access.redhat.com/rhscl/mongodb-26-rhel7
OpenShift Container Platform uses Software Collections (SCLs) to install and launch MongoDB. If you want to execute a MongoDB command inside of a running container (for debugging), you must invoke it using bash.
To do so, first identify the name of the running MongoDB pod. For example, you can view the list of pods in your current project:
$ oc get pods
Then, open a remote shell session to the desired pod:
$ oc rsh <pod>
When you enter the container, the required SCL is automatically enabled.
You can now run mongo commands from the bash shell to start a MongoDB interactive session and perform normal MongoDB operations. For example, to switch to the sampledb database and authenticate as the database user:
bash-4.2$ mongo -u $MONGODB_USER -p $MONGODB_PASSWORD $MONGODB_DATABASE MongoDB shell version: 2.4.9 connecting to: sampledb >
When you are finished, press CTRL+D to leave the MongoDB session.
The MongoDB user name, password, database name, and admin password must be configured with the following environment variables:
| Variable Name | Description |
|---|---|
|
User name for MongoDB account to be created. |
|
Password for the user account. |
|
Database name. |
|
Password for the admin user. |
|
You must specify the user name, password, database name, and admin password. If you do not specify all four, the pod will fail to start and OpenShift Container Platform will continuously try to restart it. |
|
The administrator user name is set to admin and you must specify its password
by setting the |
MongoDB settings can be configured with the following environment variables:
| Variable Name | Description | Default | ||
|---|---|---|---|---|
|
Disable data file preallocation. |
|
||
|
Set MongoDB to use a smaller default data file size. |
|
||
|
Runs MongoDB in a quiet mode that attempts to limit the amount of output. |
|
||
|
(MongoDB version 2.4 only) Enables the text search feature.
|
|
The MongoDB image can be run with mounted volumes to enable persistent storage for the database:
/var/lib/mongodb/data - This is the database directory where MongoDB stores database files.
Passwords are part of the image configuration, therefore the only supported
method to change passwords for the database user (MONGODB_USER) and admin
user is by changing the environment variables MONGODB_PASSWORD and
MONGODB_ADMIN_PASSWORD, respectively.
You can view the current passwords by viewing the pod or deployment configuration in the web console or by listing the environment variables with the CLI:
$ oc set env pod <pod_name> --list
Changing database passwords directly in MongoDB causes a mismatch between the values stored in the variables and the actual passwords. Whenever a database container starts, it resets the passwords to the values stored in the environment variables.
To change these passwords, update one or both of the desired environment
variables for the related deployment configuration(s) using the oc set env
command. If multiple deployment configurations utilize these environment
variables, for example in the case of an application created from a template,
you must update the variables on each deployment configuration so that the
passwords are in sync everywhere. This can be done all in the same command:
$ oc set env dc <dc_name> [<dc_name_2> ...] \ MONGODB_PASSWORD=<new_password> \ MONGODB_ADMIN_PASSWORD=<new_admin_password>
|
Depending on your application, there may be other environment variables for
passwords in other parts of the application that should also be updated to
match. For example, there could be a more generic |
Updating the environment variables triggers the redeployment of the database server if you have a configuration change trigger. Otherwise, you must manually start a new deployment in order to apply the password changes.
To verify that new passwords are in effect, first open a remote shell session to the running MongoDB pod:
$ oc rsh <pod>
From the bash shell, verify the database user’s new password:
bash-4.2$ mongo -u $MONGODB_USER -p <new_password> $MONGODB_DATABASE --eval "db.version()"
If the password was changed correctly, you should see output like this:
MongoDB shell version: 2.6.9 connecting to: sampledb 2.6.9
To verify the admin user’s new password:
bash-4.2$ mongo -u admin -p <new_admin_password> admin --eval "db.version()"
If the password was changed correctly, you should see output like this:
MongoDB shell version: 2.4.9 connecting to: admin 2.4.9
OpenShift Container Platform provides a template to make creating a new database service easy. The template provides parameter fields to define all the mandatory environment variables (user, password, database name, etc) with predefined defaults including auto-generation of password values. It will also define both a deployment configuration and a service.
The MongoDB templates should have been registered in the default openshift project by your cluster administrator during the initial cluster setup. See Loading the Default Image Streams and Templates for more details, if required.
There are two templates available:
mongodb-ephemeral is for development/testing purposes only because it uses
ephemeral storage for the database content. This means that if the database
pod is restarted for any reason, such as the pod being moved to another node
or the deployment configuration being updated and triggering a redeploy, all
data will be lost.
mongodb-persistent uses a persistent volume store for the database data
which means the data will survive a pod restart.
Using persistent volumes requires a persistent volume pool be defined in the
OpenShift Container Platform deployment.
Cluster administrator instructions for setting up the pool are located
here.
You can find instructions for instantiating templates by following these instructions.
Once you have instantiated the service, you can copy the user name, password, and database name environment variables into a deployment configuration for another component that intends to access the database. That component can then access the database via the service that was defined.
|
Enabling clustering for database images is currently in Technology Preview and not intended for production use. |
Red Hat provides a proof-of-concept template for MongoDB replication (clustering); you can obtain the example template from GitHub.
For example, to upload the example template into the current project’s template library:
$ oc create -f \
https://raw.githubusercontent.com/openshift/mongodb/master/2.4/examples/replica/mongodb-clustered.json
|
The example template does not use persistent storage. When you lose all members of the replication set, your data will be lost. |
The following sections detail the objects defined in the example template and describe how they work together to start a cluster of MongoDB servers implementing master-slave replication and automated failover. This is the recommended replication strategy for MongoDB.
To set up MongoDB replication, a deployment configuration is defined in the example template that defines a replication controller. The replication controller manages the members of the MongoDB cluster.
To tell a MongoDB server that the member will be part of the cluster, additional environment variables are provided for the container defined in the replication controller pod template:
| Variable Name | Description | Default |
|---|---|---|
|
Specifies the name of the replication set. |
rs0 |
|
See: Generate a Key File |
generated |
kind: DeploymentConfig
apiVersion: v1
metadata:
name: "${MONGODB_SERVICE_NAME}"
spec:
strategy:
type: Recreate
resources: {}
triggers:
- type: ConfigChange
replicas: 3
selector:
name: mongodb-replica
template:
metadata:
labels:
name: mongodb-replica
spec:
containers:
- name: member
image: openshift/mongodb-24-centos7
env:
- name: MONGODB_USER
value: "${MONGODB_USER}"
- name: MONGODB_PASSWORD
value: "${MONGODB_PASSWORD}"
- name: MONGODB_DATABASE
value: "${MONGODB_DATABASE}"
- name: MONGODB_ADMIN_PASSWORD
value: "${MONGODB_ADMIN_PASSWORD}"
- name: MONGODB_REPLICA_NAME
value: "${MONGODB_REPLICA_NAME}"
- name: MONGODB_SERVICE_NAME
value: "${MONGODB_SERVICE_NAME}"
- name: MONGODB_KEYFILE_VALUE
value: "${MONGODB_KEYFILE_VALUE}"
ports:
- containerPort: 27017
protocol: TCP
restartPolicy: Never
dnsPolicy: ClusterFirstAfter the deployment configuration is created and the pods with MongoDB cluster
members are started, they will not be initialized. Instead, they start as part
of the rs0 replication set, as the value of MONGODB_REPLICA_NAME is set to
rs0 by default.
To initialize members created by the
deployment configuration, the pods are started with the initiate argument,
which instructs the startup script to behave slightly differently
than a regular, stand-alone MongoDB database.
- kind: DeploymentConfig
apiVersion: v1
metadata:
name: "${MONGODB_SERVICE_NAME}"
spec:
strategy:
type: Recreate
recreateParams:
post:
failurePolicy: Retry
execNewPod:
command: ["run-mongod","initiate"]
containerName: mongodb
env:
- name: MONGODB_INITIAL_REPLICA_COUNT
value: '3'
triggers:
- type: ConfigChange
replicas: 3
selector:
name: mongodb-replica
template:
metadata:
labels:
name: mongodb-replica
spec:
containers:
- name: mongodb
image: openshift/mongodb-24-centos7
readinessProbe:
tcpSocket:
port: 27017
initialDelaySeconds: 15
timeoutSeconds: 1
env:
- name: MONGODB_USER
value: "${MONGODB_USER}"
- name: MONGODB_PASSWORD
value: "${MONGODB_PASSWORD}"
- name: MONGODB_DATABASE
value: "${MONGODB_DATABASE}"
- name: MONGODB_ADMIN_PASSWORD
value: "${MONGODB_ADMIN_PASSWORD}"
- name: MONGODB_REPLICA_NAME
value: "${MONGODB_REPLICA_NAME}"
- name: MONGODB_SERVICE_NAME
value: "${MONGODB_SERVICE_NAME}"
- name: MONGODB_KEYFILE_VALUE
value: "${MONGODB_KEYFILE_VALUE}"
ports:
- containerPort: 27017The initiate argument in the container specification
above instructs the container to first discover all running member pods within
the MongoDB cluster. To achieve this, a headless service is defined named
mongodb in the example template.
To have a headless service, the portalIP parameter in the service definition
is set to None. Then you can use a DNS query to get a list of the pod IP
addresses that represents the current endpoints for this service.
kind: "Service"
apiVersion: "v1"
metadata:
name: "${MONGODB_SERVICE_NAME}"
labels:
name: "${MONGODB_SERVICE_NAME}"
spec:
ports:
- protocol: "TCP"
port: 27017
targetPort: 27017
nodePort: 0
selector:
name: "mongodb-replica"
portalIP: "None"
type: "ClusterIP"
sessionAffinity: "None"
status:
loadBalancer: {}When the script that runs as the container entrypoint has the IP addresses of
all running MongoDB members, it creates a MongoDB replication set configuration
where it lists all member IP addresses. It then initiates the replication set
using rs.initiate(config). The script waits until MongoDB elects the PRIMARY
member of the cluster.
Once the PRIMARY member has been elected, the entrypoint script starts creating MongoDB users and databases.
Clients can then start using the MongoDB instance by sending the queries to the mongodb service. As this service is a headless service, they do not need to provide the IP address. Clients can use mongodb:27017 for connections. The service then sends the query to one of the members in the replication set.
To increase the number of members in the cluster:
$ oc scale rc mongodb-1 --replicas=<number>
This tells the replication controller to create a new MongoDB member pod. When a new member is created, the member entrypoint first attempts to discover other running members in the cluster. It then chooses one and adds itself to the list of members. Once the replication configuration is updated, the other members replicate the data to a new pod and start a new election.