You can control which images can be imported, tagged, and run in a cluster. There are two facilities for this purpose.
Allowed Registries for import is an image policy configuration that allows to restrict image origins to particular set of external registries. This set of rules is applied to any image being imported or tagged into any image stream. Therefore any image referencing registry not matched by the rule set will be rejected.
ImagePolicy admission plug-in lets you specify which images are allowed to be run on your cluster. This is currently considered beta. It allows you to control:
Image sources: which registries can be used to pull images
Image resolution: force pods to run with immutable digests to ensure the image does not change due to a re-tag
Container image label restrictions: limits or requires labels on an image
Image annotation restrictions: limits or requires the annotations on an image in the integrated container registry
You can configure registries allowed for import in master-config.yaml
under imagePolicyConfig:allowedRegistriesForImport section as demonstrated in
the following example. If the setting is not present, all images are allowed.
imagePolicyConfig:
allowedRegistriesForImport:
-
domainName: registry.access.redhat.com (1)
-
domainName: *.mydomain.com
insecure: true (2)
-
domainName: local.registry.corp:5000 (3)| 1 | Allow any image from the specified secure registry. |
| 2 | Allow any image from any insecure registry hosted on any sub-domain of
mydomain.com. The mydomain.com is not whitelisted. |
| 3 | Allow any image from the given registry with port specified. |
Each rule is composed of the following attributes:
domainName: is a hostname optionally terminated by :<port> suffix
where special wildcard characters (?, *) are recognized. The former
matches a sequence of characters of any length while the later matches
exactly one character. The wildcard characters can be present both before and
after : separator. The wildcards apply only to the part before or after the
separator regardless of separator’s presence.
insecure: is a boolean used to decide which ports are matched if the
:<port> part is missing from domainName. If true, the domainName
will match registries with :80 suffix or unspecified port as long as the
insecure flag is used during import. If false, registries with :443 suffix
or unspecified port will be matched.
If a rule should match both secure and insecure ports of the same domain, the
rule must be listed twice (once with insecure=true and once with
insecure=false.
Unqualified images references are qualified to docker.io before any
rule evaluation. To whitelist them, use domainName: docker.io.
domainName: * rule matches any registry hostname, but port is still
restricted to 443. To match arbitrary registry serving on arbitrary port, use
domainName: *:*.
Based on the rules established in Example Configuration of Registries Allowed for Import:
oc tag --insecure reg.mydomain.com/app:v1 app:v1 is whitelisted by the
handling of the mydomain.com rule
oc import-image --from reg1.mydomain.com:80/foo foo:latest will be also
whitelisted
oc tag local.registry.corp/bar bar:latest will be rejected because the port
does not match 5000 in the third rule
Rejected image imports will generate error messages similar to the following text:
The ImageStream "bar" is invalid: * spec.tags[latest].from.name: Forbidden: registry "local.registry.corp" not allowed by whitelist: "local.registry.corp:5000", "*.mydomain.com:80", "registry.access.redhat.com:443" * status.tags[latest].items[0].dockerImageReference: Forbidden: registry "local.registry.corp" not allowed by whitelist: "local.registry.corp:5000", "*.mydomain.com:80", "registry.access.redhat.com:443"
To enable this feature, configure the plug-in in master-config.yaml:
admissionConfig:
pluginConfig:
openshift.io/ImagePolicy:
configuration:
kind: ImagePolicyConfig
apiVersion: v1
resolveImages: AttemptRewrite (1)
executionRules: (2)
- name: execution-denied
# Reject all images that have the annotation images.openshift.io/deny-execution set to true.
# This annotation may be set by infrastructure that wishes to flag particular images as dangerous
onResources: (3)
- resource: pods
- resource: builds
reject: true (4)
matchImageAnnotations: (5)
- key: images.openshift.io/deny-execution
value: "true"
skipOnResolutionFailure: true (6)
- name: allow-images-from-internal-registry
# allows images from the internal registry and tries to resolve them
onResources:
- resource: pods
- resource: builds
matchIntegratedRegistry: true
- name: allow-images-from-dockerhub
onResources:
- resource: pods
- resource: builds
matchRegistries:
- docker.io
resolutionRules: (7)
- targetResource:
resource: pods
localNames: true
- targetResource: (8)
group: batch
resource: jobs
localNames: true (9)| 1 | Try to resolve images to an immutable image digest and update the image pull specification in the pod. |
| 2 | Array of rules to evaluate against incoming resources. If you only have reject==true rules, the default is allow all. If you have any accept rule, the default is deny all. |
| 3 | Indicates which resources to enforce rules upon. If nothing is specified, the default is pods. |
| 4 | Indicates that if this rule matches, the pod should be rejected. |
| 5 | List of annotations to match on the image object’s metadata. |
| 6 | If you are not able to resolve the image, do not fail the pod. |
| 7 | Array of rules allowing use of image streams in Kubernetes resources. The default configuration allows pods, replication controllers, replica sets, deployments, and jobs to use same-project image stream tag references in their image fields. |
| 8 | Identifies the group and resource to which this rule applies. If resource is *,
this rule will apply to all resources in that group. |
| 9 | LocalNames will allow single segment names (for example, ruby:2.4) to be
interpreted as namespace-local image stream tags, but only if the resource or
target image stream has
local name
resolution enabled. |
|
If you normally rely on infrastructure images being pulled using a default
registry prefix (such as docker.io or registry.access.redhat.com), those
images will not match to any |
Use the openshift/image-policy-check to test your configuration.
For example, use the information above, then test like this:
oc import-image openshift/image-policy-check:latest --confirm
Create a pod using this YAML. The pod should be created.
apiVersion: v1
kind: Pod
metadata:
generateName: test-pod
spec:
containers:
- image: docker.io/openshift/image-policy-check:latest
name: first
Create another pod pointing to a different registry. The pod should be rejected.
apiVersion: v1
kind: Pod
metadata:
generateName: test-pod
spec:
containers:
- image: different-registry/openshift/image-policy-check:latest
name: first
Create a pod pointing to the internal registry using the imported image. The pod should be created and if you look at the image specification, you should see a digest in place of the tag.
apiVersion: v1
kind: Pod
metadata:
generateName: test-pod
spec:
containers:
- image: <internal registry IP>:5000/<namespace>/image-policy-check:latest
name: first
Create a pod pointing to the internal registry using the imported image. The pod should be created and if you look at the image specification, you should see the tag unmodified.
apiVersion: v1
kind: Pod
metadata:
generateName: test-pod
spec:
containers:
- image: <internal registry IP>:5000/<namespace>/image-policy-check:v1
name: first
Get the digest from oc get istag/image-policy-check:latest and use it for
oc annotate images/<digest> images.openshift.io/deny-execution=true. For example:
$ oc annotate images/sha256:09ce3d8b5b63595ffca6636c7daefb1a615a7c0e3f8ea68e5db044a9340d6ba8 images.openshift.io/deny-execution=true
Create this pod again, and you should see the pod rejected:
apiVersion: v1
kind: Pod
metadata:
generateName: test-pod
spec:
containers:
- image: <internal registry IP>:5000/<namespace>/image-policy-check:latest
name: first